Linkedin - Autodesk Inventor 2022 Essential Training

File Name

Size

1. Introduction/1. Design products with Autodesk Inventor 2022.mp4

3.6 MB

1. Introduction/2. Use the exercise files.mp4

996 kB

1. Introduction/3. Certification overview.mp4

7.0 MB

10. Build Parts with Placed Features/1. Add concentric holes.mp4

16 MB

10. Build Parts with Placed Features/2. Add linear holes.mp4

25 MB

10. Build Parts with Placed Features/3. Add threaded holes.mp4

14 MB

10. Build Parts with Placed Features/4. Modify edges with fillets and chamfers.mp4

13 MB

10. Build Parts with Placed Features/5. Hollow a part with the shell feature.mp4

20 MB

11. Create Patterns of Features/1. Create rectangular feature patterns.mp4

20 MB

11. Create Patterns of Features/2. Create circular patterns.mp4

12 MB

11. Create Patterns of Features/3. Mirror part features.mp4

14 MB

12. Add Parts to an Assembly File/1. Introduction to assemblies.mp4

9.4 MB

12. Add Parts to an Assembly File/2. Place components.mp4

21 MB

12. Add Parts to an Assembly File/3. Create and edit components in an assembly.mp4

33 MB

13. Use Constraints to Position Parts/1. Mate and Flush constraint.mp4

38 MB

13. Use Constraints to Position Parts/2. Angle constraint.mp4

14 MB

13. Use Constraints to Position Parts/3. Insert constraint.mp4

13 MB

13. Use Constraints to Position Parts/4. Drive constraints.mp4

21 MB

14. Create Drawing Views/1. Explore initial drawing creation.mp4

18 MB

14. Create Drawing Views/2. Place base and projected views.mp4

23 MB

14. Create Drawing Views/3. Create section views.mp4

24 MB

14. Create Drawing Views/4. Create detail views.mp4

12 MB

15. Create Basic Annotations/1. Create general dimensions.mp4

17 MB

15. Create Basic Annotations/2. Change dimension precision.mp4

12 MB

15. Create Basic Annotations/3. Create baseline ordinate and chain dimensions.mp4

14 MB

16. Conclusion/1. Next steps.mp4

2.9 MB

2. Basic Concepts/1. Explore major workflow steps.mp4

7.6 MB

2. Basic Concepts/2. Home dashboard.mp4

11 MB

2. Basic Concepts/3. Review different file types.mp4

7.3 MB

3. Leverage the Project/1. Create a practice project.mp4

7.0 MB

3. Leverage the Project/2. Set up the exercise files project.mp4

6.0 MB

4. Navigate the Interface/1. Navigate using the ViewCube.mp4

19 MB

4. Navigate the Interface/2. Navigate using the navigation tools.mp4

15 MB

4. Navigate the Interface/3. Use the browser and right-click menu.mp4

5.2 MB

5. Sketch Concepts/1. Introduce sketching.mp4

16 MB

5. Sketch Concepts/2. Work with origin geometry.mp4

8.2 MB

5. Sketch Concepts/3. Understand constraints.mp4

23 MB

6. Create Sketch Geometry/1. Draw lines.mp4

21 MB

6. Create Sketch Geometry/2. Create rectangles and arcs.mp4

33 MB

6. Create Sketch Geometry/3. Create splines.mp4

28 MB

6. Create Sketch Geometry/4. Construction geometry.mp4

13 MB

6. Create Sketch Geometry/5. Dimensioning.mp4

26 MB

6. Create Sketch Geometry/6. Parameters.mp4

21 MB

7. Modify Sketch Geometry/1. Extend and trim sketch geometry.mp4

11 MB

7. Modify Sketch Geometry/2. Offset sketch geometry.mp4

12 MB

7. Modify Sketch Geometry/3. Pattern and mirror sketch geometry.mp4

19 MB

8. Work Features and Projections/1. Understand work features.mp4

9.4 MB

8. Work Features and Projections/2. Create offset workplanes.mp4

12 MB

8. Work Features and Projections/3. Create additional types of workplanes.mp4

21 MB

8. Work Features and Projections/4. Create a workpoint and work axis.mp4

8.7 MB

8. Work Features and Projections/5. Project geometry.mp4

16 MB

9. Understand Part Modeling/1. Part feature introduction.mp4

11 MB

9. Understand Part Modeling/10. Editing sculpted shapes using edit form.mp4

14 MB

9. Understand Part Modeling/2. Create a base extrusion.mp4

24 MB

9. Understand Part Modeling/3. Create an extrusion to the next face.mp4

14 MB

9. Understand Part Modeling/4. Create revolves.mp4

28 MB

9. Understand Part Modeling/5. Create a sweep.mp4

19 MB

9. Understand Part Modeling/6. Complex shapes with the Loft tool.mp4

31 MB

9. Understand Part Modeling/7. Controlling lofts with rails.mp4

20 MB

9. Understand Part Modeling/8. Introduction to organic shapes with T-Splines.mp4

5.3 MB

9. Understand Part Modeling/9. Create a base T-Splines form.mp4

9.6 MB

Exercise Files/01_Basic concepts/01_03/ANSI B18.2.2 - 1_4 - 20(3).ipt

184 kB

Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt

210 kB

Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt

208 kB

Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt

191 kB

Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt

204 kB

Exercise Files/01_Basic concepts/01_03/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt

198 kB

Exercise Files/01_Basic concepts/01_03/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt

182 kB

Exercise Files/01_Basic concepts/01_03/Air Adjuster.ipt

146 kB

Exercise Files/01_Basic concepts/01_03/Beveled Sleeve.ipt

130 kB

Exercise Files/01_Basic concepts/01_03/Brake Pad.ipt

162 kB

Exercise Files/01_Basic concepts/01_03/Carburetor Housing.ipt

206 kB

Exercise Files/01_Basic concepts/01_03/Carburetor Housing_v2.ipt

184 kB

Exercise Files/01_Basic concepts/01_03/Carburetor Housing_v3.idw

265 kB

Exercise Files/01_Basic concepts/01_03/Carburetor Housing_v3.ipt

246 kB

Exercise Files/01_Basic concepts/01_03/Carburetor.iam

226 kB

Exercise Files/01_Basic concepts/01_03/Clutch Bearing.ipt

118 kB

Exercise Files/01_Basic concepts/01_03/Clutch Gear.ipt

242 kB

Exercise Files/01_Basic concepts/01_03/Clutch Housing.ipt

182 kB

Exercise Files/01_Basic concepts/01_03/Clutch Prop Mount.ipt

354 kB

Exercise Files/01_Basic concepts/01_03/Clutch Sleeve11.ipt

110 kB

Exercise Files/01_Basic concepts/01_03/Clutch Sleeve14.ipt

148 kB

Exercise Files/01_Basic concepts/01_03/Cone.ipt

424 kB

Exercise Files/01_Basic concepts/01_03/Crank Arm.ipt

98 kB

Exercise Files/01_Basic concepts/01_03/Crankshaft Cover.ipt

214 kB

Exercise Files/01_Basic concepts/01_03/Crankshaft.ipt

176 kB

Exercise Files/01_Basic concepts/01_03/Engine Block.ipt

2.0 MB

Exercise Files/01_Basic concepts/01_03/Engine.iam

1.9 MB

Exercise Files/01_Basic concepts/01_03/Engine.idw

1.1 MB

Exercise Files/01_Basic concepts/01_03/Engine.ipn

98 kB

Exercise Files/01_Basic concepts/01_03/Engine_v2.ipn

114 kB

Exercise Files/01_Basic concepts/01_03/Face Plate.ipt

214 kB

Exercise Files/01_Basic concepts/01_03/Fuel Adjuster.ipt

172 kB

Exercise Files/01_Basic concepts/01_03/Fuel Intake Adjuster Pin.ipt

139 kB

Exercise Files/01_Basic concepts/01_03/Fuel Intake.ipt

164 kB

Exercise Files/01_Basic concepts/01_03/Gas Regulator.ipt

183 kB

Exercise Files/01_Basic concepts/01_03/Heat Sink v2.ipt

82 kB

Exercise Files/01_Basic concepts/01_03/Heat Sink.ipt

617 kB

Exercise Files/01_Basic concepts/01_03/Hex Cap.ipt

132 kB

Exercise Files/01_Basic concepts/01_03/Horseshoe Clip.ipt

131 kB

Exercise Files/01_Basic concepts/01_03/Mixture Control.ipt

220 kB

Exercise Files/01_Basic concepts/01_03/Muffler Tip.ipt

764 kB

Exercise Files/01_Basic concepts/01_03/Muffler.ipt

1.4 MB

Exercise Files/01_Basic concepts/01_03/Piston Pin.ipt

84 kB

Exercise Files/01_Basic concepts/01_03/Piston Shaft.ipt

147 kB

Exercise Files/01_Basic concepts/01_03/Piston.ipt

138 kB

Exercise Files/01_Basic concepts/01_03/Prop Mount.ipt

363 kB

Exercise Files/01_Basic concepts/01_03/Prop.ipt

1.3 MB

Exercise Files/01_Basic concepts/01_03/Pulley Shaft.ipt

118 kB

Exercise Files/01_Basic concepts/01_03/Screw Lock.ipt

126 kB

Exercise Files/01_Basic concepts/01_03/Sleeve.ipt

109 kB

Exercise Files/01_Basic concepts/01_03/Starter Cover.ipt

258 kB

Exercise Files/01_Basic concepts/01_03/Starter Handle.ipt

308 kB

Exercise Files/01_Basic concepts/01_03/Washer.ipt

104 kB

Exercise Files/01_Basic concepts/01_03/washer4.ipt

81 kB

Exercise Files/03_Navigating the interface/03_01/ANSI B18.2.2 - 1_4 - 20(3).ipt

184 kB

Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt

210 kB

Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt

208 kB

Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt

191 kB

Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt

204 kB

Exercise Files/03_Navigating the interface/03_01/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt

198 kB

Exercise Files/03_Navigating the interface/03_01/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt

182 kB

Exercise Files/03_Navigating the interface/03_01/Air Adjuster.ipt

146 kB

Exercise Files/03_Navigating the interface/03_01/Beveled Sleeve.ipt

130 kB

Exercise Files/03_Navigating the interface/03_01/Brake Pad.ipt

162 kB

Exercise Files/03_Navigating the interface/03_01/Carburetor Housing.ipt

206 kB

Exercise Files/03_Navigating the interface/03_01/Carburetor Housing_v2.ipt

184 kB

Exercise Files/03_Navigating the interface/03_01/Carburetor Housing_v3.idw

265 kB

Exercise Files/03_Navigating the interface/03_01/Carburetor Housing_v3.ipt

243 kB

Exercise Files/03_Navigating the interface/03_01/Carburetor.iam

250 kB

Exercise Files/03_Navigating the interface/03_01/Clutch Bearing.ipt

118 kB

Exercise Files/03_Navigating the interface/03_01/Clutch Gear.ipt

242 kB

Exercise Files/03_Navigating the interface/03_01/Clutch Housing.ipt

182 kB

Exercise Files/03_Navigating the interface/03_01/Clutch Prop Mount.ipt

354 kB

Exercise Files/03_Navigating the interface/03_01/Clutch Sleeve11.ipt

110 kB

Exercise Files/03_Navigating the interface/03_01/Clutch Sleeve14.ipt

148 kB

Exercise Files/03_Navigating the interface/03_01/Cone.ipt

423 kB

Exercise Files/03_Navigating the interface/03_01/Crank Arm.ipt

98 kB

Exercise Files/03_Navigating the interface/03_01/Crankshaft Cover.ipt

214 kB

Exercise Files/03_Navigating the interface/03_01/Crankshaft.ipt

176 kB

Exercise Files/03_Navigating the interface/03_01/Engine Block.ipt

2.0 MB

Exercise Files/03_Navigating the interface/03_01/Engine.iam

1.9 MB

Exercise Files/03_Navigating the interface/03_01/Engine.idw

1.1 MB

Exercise Files/03_Navigating the interface/03_01/Engine.ipn

98 kB

Exercise Files/03_Navigating the interface/03_01/Engine_v2.ipn

114 kB

Exercise Files/03_Navigating the interface/03_01/Face Plate.ipt

214 kB

Exercise Files/03_Navigating the interface/03_01/Fuel Adjuster.ipt

172 kB

Exercise Files/03_Navigating the interface/03_01/Fuel Intake Adjuster Pin.ipt

139 kB

Exercise Files/03_Navigating the interface/03_01/Fuel Intake.ipt

164 kB

Exercise Files/03_Navigating the interface/03_01/Gas Regulator.ipt

183 kB

Exercise Files/03_Navigating the interface/03_01/Heat Sink v2.ipt

82 kB

Exercise Files/03_Navigating the interface/03_01/Heat Sink.ipt

617 kB

Exercise Files/03_Navigating the interface/03_01/Hex Cap.ipt

132 kB

Exercise Files/03_Navigating the interface/03_01/Horseshoe Clip.ipt

131 kB

Exercise Files/03_Navigating the interface/03_01/Mixture Control.ipt

220 kB

Exercise Files/03_Navigating the interface/03_01/Muffler Tip.ipt

764 kB

Exercise Files/03_Navigating the interface/03_01/Muffler.ipt

1.4 MB

Exercise Files/03_Navigating the interface/03_01/Piston Pin.ipt

84 kB

Exercise Files/03_Navigating the interface/03_01/Piston Shaft.ipt

147 kB

Exercise Files/03_Navigating the interface/03_01/Piston.ipt

138 kB

Exercise Files/03_Navigating the interface/03_01/Prop Mount.ipt

363 kB

Exercise Files/03_Navigating the interface/03_01/Prop.ipt

1.3 MB

Exercise Files/03_Navigating the interface/03_01/Pulley Shaft.ipt

118 kB

Exercise Files/03_Navigating the interface/03_01/Screw Lock.ipt

126 kB

Exercise Files/03_Navigating the interface/03_01/Sleeve.ipt

109 kB

Exercise Files/03_Navigating the interface/03_01/Starter Cover.ipt

258 kB

Exercise Files/03_Navigating the interface/03_01/Starter Handle.ipt

308 kB

Exercise Files/03_Navigating the interface/03_01/Washer.ipt

104 kB

Exercise Files/03_Navigating the interface/03_01/washer4.ipt

81 kB

Exercise Files/03_Navigating the interface/03_02/ANSI B18.2.2 - 1_4 - 20(3).ipt

184 kB

Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt

210 kB

Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt

208 kB

Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt

191 kB

Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt

204 kB

Exercise Files/03_Navigating the interface/03_02/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt

198 kB

Exercise Files/03_Navigating the interface/03_02/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt

182 kB

Exercise Files/03_Navigating the interface/03_02/Air Adjuster.ipt

146 kB

Exercise Files/03_Navigating the interface/03_02/Beveled Sleeve.ipt

130 kB

Exercise Files/03_Navigating the interface/03_02/Brake Pad.ipt

162 kB

Exercise Files/03_Navigating the interface/03_02/Carburetor Housing.ipt

206 kB

Exercise Files/03_Navigating the interface/03_02/Carburetor Housing_v2.ipt

184 kB

Exercise Files/03_Navigating the interface/03_02/Carburetor Housing_v3.idw

265 kB

Exercise Files/03_Navigating the interface/03_02/Carburetor Housing_v3.ipt

242 kB

Exercise Files/03_Navigating the interface/03_02/Carburetor.iam

249 kB

Exercise Files/03_Navigating the interface/03_02/Clutch Bearing.ipt

118 kB

Exercise Files/03_Navigating the interface/03_02/Clutch Gear.ipt

242 kB

Exercise Files/03_Navigating the interface/03_02/Clutch Housing.ipt

182 kB

Exercise Files/03_Navigating the interface/03_02/Clutch Prop Mount.ipt

354 kB

Exercise Files/03_Navigating the interface/03_02/Clutch Sleeve11.ipt

110 kB

Exercise Files/03_Navigating the interface/03_02/Clutch Sleeve14.ipt

148 kB

Exercise Files/03_Navigating the interface/03_02/Cone.ipt

424 kB

Exercise Files/03_Navigating the interface/03_02/Crank Arm.ipt

98 kB

Exercise Files/03_Navigating the interface/03_02/Crankshaft Cover.ipt

214 kB

Exercise Files/03_Navigating the interface/03_02/Crankshaft.ipt

176 kB

Exercise Files/03_Navigating the interface/03_02/Engine Block.ipt

2.0 MB

Exercise Files/03_Navigating the interface/03_02/Engine.iam

1.9 MB

Exercise Files/03_Navigating the interface/03_02/Engine.idw

1.1 MB

Exercise Files/03_Navigating the interface/03_02/Engine.ipn

98 kB

Exercise Files/03_Navigating the interface/03_02/Engine_v2.ipn

114 kB

Exercise Files/03_Navigating the interface/03_02/Face Plate.ipt

214 kB

Exercise Files/03_Navigating the interface/03_02/Fuel Adjuster.ipt

172 kB

Exercise Files/03_Navigating the interface/03_02/Fuel Intake Adjuster Pin.ipt

139 kB

Exercise Files/03_Navigating the interface/03_02/Fuel Intake.ipt

164 kB

Exercise Files/03_Navigating the interface/03_02/Gas Regulator.ipt

183 kB

Exercise Files/03_Navigating the interface/03_02/Heat Sink v2.ipt

82 kB

Exercise Files/03_Navigating the interface/03_02/Heat Sink.ipt

616 kB

Exercise Files/03_Navigating the interface/03_02/Hex Cap.ipt

132 kB

Exercise Files/03_Navigating the interface/03_02/Horseshoe Clip.ipt

131 kB

Exercise Files/03_Navigating the interface/03_02/Mixture Control.ipt

220 kB

Exercise Files/03_Navigating the interface/03_02/Muffler Tip.ipt

764 kB

Exercise Files/03_Navigating the interface/03_02/Muffler.ipt

1.4 MB

Exercise Files/03_Navigating the interface/03_02/Piston Pin.ipt

84 kB

Exercise Files/03_Navigating the interface/03_02/Piston Shaft.ipt

147 kB

Exercise Files/03_Navigating the interface/03_02/Piston.ipt

138 kB

Exercise Files/03_Navigating the interface/03_02/Prop Mount.ipt

363 kB

Exercise Files/03_Navigating the interface/03_02/Prop.ipt

1.3 MB

Exercise Files/03_Navigating the interface/03_02/Pulley Shaft.ipt

118 kB

Exercise Files/03_Navigating the interface/03_02/Screw Lock.ipt

126 kB

Exercise Files/03_Navigating the interface/03_02/Sleeve.ipt

109 kB

Exercise Files/03_Navigating the interface/03_02/Starter Cover.ipt

256 kB

Exercise Files/03_Navigating the interface/03_02/Starter Handle.ipt

308 kB

Exercise Files/03_Navigating the interface/03_02/Washer.ipt

104 kB

Exercise Files/03_Navigating the interface/03_02/washer4.ipt

81 kB

Exercise Files/03_Navigating the interface/03_03/ANSI B18.2.2 - 1_4 - 20(3).ipt

184 kB

Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 1-64 UNC - UNC - 0.25(1).ipt

210 kB

Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 10-24 UNC - UNC - 0.5(1).ipt

208 kB

Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 2-56 UNC - 0.375(31).ipt

191 kB

Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 3-48 UNC - 0.375(31).ipt

204 kB

Exercise Files/03_Navigating the interface/03_03/ANSI B18.3 - 4-40 UNC - 0.875(31).ipt

198 kB

Exercise Files/03_Navigating the interface/03_03/ASME B18.21.1 - No. 10. Carbon Steel(4).ipt

182 kB

Exercise Files/03_Navigating the interface/03_03/Air Adjuster.ipt

146 kB

Exercise Files/03_Navigating the interface/03_03/Beveled Sleeve.ipt

130 kB

Exercise Files/03_Navigating the interface/03_03/Brake Pad.ipt

162 kB

Exercise Files/03_Navigating the interface/03_03/Carburetor Housing.ipt

206 kB

Exercise Files/03_Navigating the interface/03_03/Carburetor Housing_v2.ipt

184 kB

Exercise Files/03_Navigating the interface/03_03/Carburetor Housing_v3.idw

265 kB

Exercise Files/03_Navigating the interface/03_03/Carburetor Housing_v3.ipt

242 kB

Exercise Files/03_Navigating the interface/03_03/Carburetor.iam

249 kB

Exercise Files/03_Navigating the interface/03_03/Clutch Bearing.ipt

118 kB

Exercise Files/03_Navigating the interface/03_03/Clutch Gear.ipt

242 kB

Exercise Files/03_Navigating the interface/03_03/Clutch Housing.ipt

182 kB

Exercise Files/03_Navigating the interface/03_03/Clutch Prop Mount.ipt

354 kB

Exercise Files/03_Navigating the interface/03_03/Clutch Sleeve11.ipt

110 kB

Exercise Files/03_Navigating the interface/03_03/Clutch Sleeve14.ipt

148 kB

Exercise Files/03_Navigating the interface/03_03/Cone.ipt

424 kB

Exercise Files/03_Navigating the interface/03_03/Crank Arm.ipt

98 kB

Exercise Files/03_Navigating the interface/03_03/Crankshaft Cover.ipt

214 kB

Exercise Files/03_Navigating the interface/03_03/Crankshaft.ipt

176 kB

Exercise Files/03_Navigating the interface/03_03/Engine Block.ipt

2.0 MB

Exercise Files/03_Navigating the interface/03_03/Engine.iam

1.9 MB

Exercise Files/03_Navigating the interface/03_03/Engine.idw

1.1 MB

Exercise Files/03_Navigating the interface/03_03/Engine.ipn

98 kB

Exercise Files/03_Navigating the interface/03_03/Engine_v2.ipn

114 kB

Exercise Files/03_Navigating the interface/03_03/Face Plate.ipt

214 kB

Exercise Files/03_Navigating the interface/03_03/Fuel Adjuster.ipt

172 kB

Exercise Files/03_Navigating the interface/03_03/Fuel Intake Adjuster Pin.ipt

139 kB

Exercise Files/03_Navigating the interface/03_03/Fuel Intake.ipt

164 kB

Exercise Files/03_Navigating the interface/03_03/Gas Regulator.ipt

183 kB

Exercise Files/03_Navigating the interface/03_03/Heat Sink v2.ipt

82 kB

Exercise Files/03_Navigating the interface/03_03/Heat Sink.ipt

616 kB

Exercise Files/03_Navigating the interface/03_03/Hex Cap.ipt

132 kB

Exercise Files/03_Navigating the interface/03_03/Horseshoe Clip.ipt

131 kB

Exercise Files/03_Navigating the interface/03_03/Mixture Control.ipt

220 kB

Exercise Files/03_Navigating the interface/03_03/Muffler Tip.ipt

764 kB

Exercise Files/03_Navigating the interface/03_03/Muffler.ipt

1.4 MB

Exercise Files/03_Navigating the interface/03_03/Piston Pin.ipt

84 kB

Exercise Files/03_Navigating the interface/03_03/Piston Shaft.ipt

147 kB

Exercise Files/03_Navigating the interface/03_03/Piston.ipt

138 kB

Exercise Files/03_Navigating the interface/03_03/Prop Mount.ipt

363 kB

Exercise Files/03_Navigating the interface/03_03/Prop.ipt

1.3 MB

Exercise Files/03_Navigating the interface/03_03/Pulley Shaft.ipt

118 kB

Exercise Files/03_Navigating the interface/03_03/Screw Lock.ipt

126 kB

Exercise Files/03_Navigating the interface/03_03/Sleeve.ipt

109 kB

Exercise Files/03_Navigating the interface/03_03/Starter Cover.ipt

256 kB

Exercise Files/03_Navigating the interface/03_03/Starter Handle.ipt

308 kB

Exercise Files/03_Navigating the interface/03_03/Washer.ipt

104 kB

Exercise Files/03_Navigating the interface/03_03/washer4.ipt

81 kB

Exercise Files/04_Sketching concepts/04_03/Sketch Practice.ipt

89 kB

Exercise Files/05_Creating sketch geometry/05_02/05_02_Simple_Computer_Mouse.ipt

250 kB

Exercise Files/05_Creating sketch geometry/05_03/05_03_Computer_Mouse.ipt

277 kB

Exercise Files/05_Creating sketch geometry/05_03/05_03_Computer_Mouse_Start.ipt

80 kB

Exercise Files/05_Creating sketch geometry/05_05/Dimensioning Practice.ipt

86 kB

Exercise Files/06_Modifying sketch geometry/06_03/Pattern Mirror Start.ipt

96 kB

Exercise Files/07_Work features and projections/07_02/Work Planes.ipt

92 kB

Exercise Files/07_Work features and projections/07_03/Work Planes.ipt

94 kB

Exercise Files/07_Work features and projections/07_04/Work Axis Point Start.ipt

100 kB

Exercise Files/07_Work features and projections/07_05/Projecting Geometry.ipt

86 kB

Exercise Files/08_Understanding part modeling/08_01/Part feature intro.ipt

119 kB

Exercise Files/08_Understanding part modeling/08_03/To Next Termination.ipt

94 kB

Exercise Files/08_Understanding part modeling/08_06/Loft.ipt

171 kB

Exercise Files/08_Understanding part modeling/08_07/Loft Complete.ipt

221 kB

Exercise Files/08_Understanding part modeling/08_07/Loft Start.ipt

88 kB

Exercise Files/08_Understanding part modeling/08_10/Base Form Start.ipt

199 kB

Exercise Files/09_Building parts with placed features/09_01/Concentric Holes Start.ipt

118 kB

Exercise Files/09_Building parts with placed features/09_01/Holes Complete.ipt

153 kB

Exercise Files/09_Building parts with placed features/09_02/Holes Complete.ipt

153 kB

Exercise Files/09_Building parts with placed features/09_02/Linear Holes Start.ipt

128 kB

Exercise Files/09_Building parts with placed features/09_03/Holes Complete.ipt

153 kB

Exercise Files/09_Building parts with placed features/09_03/Threaded Holes Start.ipt

142 kB

Exercise Files/09_Building parts with placed features/09_04/Fillet Chamfer Complete.ipt

182 kB

Exercise Files/09_Building parts with placed features/09_04/Fillet Chamfer Start.ipt

154 kB

Exercise Files/09_Building parts with placed features/09_05/Bottle Start.ipt

170 kB

Exercise Files/09_Building parts with placed features/09_05/Shell Start.ipt

93 kB

Exercise Files/10_Creating feature patterns/10_01/Rectangular Pattern Start.ipt

90 kB

Exercise Files/10_Creating feature patterns/10_02/Circular Pattern Start.ipt

106 kB

Exercise Files/10_Creating feature patterns/10_03/Mirror Start.ipt

124 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Connecting Rod.ipt

96 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Connector.ipt

112 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Crank Handle.ipt

112 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Crank Rod.ipt

85 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Joint.ipt

142 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Pin.ipt

103 kB

Exercise Files/11_Adding parts to an assembly file/11_01/Universal Joint.iam

158 kB

Exercise Files/11_Adding parts to an assembly file/11_01/base.ipt

126 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Connecting Rod.ipt

96 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Connector.ipt

112 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Crank Handle.ipt

113 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Crank Rod.ipt

86 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Joint.ipt

142 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Pin.ipt

104 kB

Exercise Files/11_Adding parts to an assembly file/11_02/Universal Joint.iam

158 kB

Exercise Files/11_Adding parts to an assembly file/11_02/base.ipt

126 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Connecting Rod.ipt

95 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Connector.ipt

112 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Crank Handle.ipt

113 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Crank Rod.ipt

86 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Joint.ipt

142 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Pin.ipt

104 kB

Exercise Files/11_Adding parts to an assembly file/11_03/Universal Joint.iam

158 kB

Exercise Files/11_Adding parts to an assembly file/11_03/base.ipt

126 kB

Exercise Files/12_Using constraints to position parts/12_01/Connecting Rod.ipt

96 kB

Exercise Files/12_Using constraints to position parts/12_01/Connector.ipt

112 kB

Exercise Files/12_Using constraints to position parts/12_01/Crank Handle.ipt

113 kB

Exercise Files/12_Using constraints to position parts/12_01/Crank Rod.ipt

86 kB

Exercise Files/12_Using constraints to position parts/12_01/Handle.ipt

155 kB

Exercise Files/12_Using constraints to position parts/12_01/Joint.ipt

142 kB

Exercise Files/12_Using constraints to position parts/12_01/Pin.ipt

104 kB

Exercise Files/12_Using constraints to position parts/12_01/Universal Joint.iam

162 kB

Exercise Files/12_Using constraints to position parts/12_01/Universal Shaft Start.iam

96 kB

Exercise Files/12_Using constraints to position parts/12_01/Universal Shaft.iam

98 kB

Exercise Files/12_Using constraints to position parts/12_01/base.ipt

127 kB

Exercise Files/12_Using constraints to position parts/12_02/Connecting Rod.ipt

96 kB

Exercise Files/12_Using constraints to position parts/12_02/Joint.ipt

142 kB

Exercise Files/12_Using constraints to position parts/12_02/Universal Shaft Angle.iam

98 kB

Exercise Files/12_Using constraints to position parts/12_03/Connecting Rod.ipt

96 kB

Exercise Files/12_Using constraints to position parts/12_03/Joint.ipt

142 kB

Exercise Files/12_Using constraints to position parts/12_03/Universal Shaft Start.iam

96 kB

Exercise Files/12_Using constraints to position parts/12_04/Base.ipt

100 kB

Exercise Files/12_Using constraints to position parts/12_04/Drive Constraints.iam

86 kB

Exercise Files/12_Using constraints to position parts/12_04/Slide.ipt

98 kB

Exercise Files/13_Creating drawing views/13_02/Engine Block.ipt

2.0 MB

Exercise Files/13_Creating drawing views/13_03/Engine Block Section - COMPLETE.idw

814 kB

Exercise Files/13_Creating drawing views/13_03/Engine Block Section.idw

210 kB

Exercise Files/13_Creating drawing views/13_03/Engine Block.ipt

2.0 MB

Exercise Files/13_Creating drawing views/13_04/Engine Block Detail - COMPLETE.idw

724 kB

Exercise Files/13_Creating drawing views/13_04/Engine Block Detail.idw

706 kB

Exercise Files/13_Creating drawing views/13_04/Engine Block.ipt

2.0 MB

Exercise Files/14_Create Basic Annotations/14_01/Engine Block Dimensions.idw

335 kB

Exercise Files/14_Create Basic Annotations/14_01/Engine Block.ipt

2.0 MB

Exercise Files/14_Create Basic Annotations/14_02/Engine Block Precision.idw

352 kB

Exercise Files/14_Create Basic Annotations/14_02/Engine Block.ipt

2.0 MB

Exercise Files/14_Create Basic Annotations/14_03/Engine Block Baseline.idw

274 kB

Exercise Files/14_Create Basic Annotations/14_03/Engine Block.ipt

2.0 MB